Cup Holder Replacement 2106800114 for Mercedes Benz e300

After more than 10,000 opening and closing tests, the wear of the snap fastener is less than 0.01 millimeter. The movable joint is embedded with wear-resistant plates, so there will be no significant damage. After simulating 10,000 daily opening and closing tests, the wear of the snap fastener is only 0.008 millimeter, and the opening and closing force variation does not exceed 5%. This solves the problem of the snap fastener loosening over time and automatically popping open when passing over speed bumps. It remains as smooth as new even after 5 years of use.

1. 2106800114 Front Cup Holder is a 1:1 three-dimensional replica of the original vehicle, with an error of no more than 0.05 millimeters. It was 3D-scanned using the original factory water cup holder of model 01 E320, and the modeling accuracy reached 0.02 millimeters. During the mold trial production, it was calibrated 5 times. The final installation gap of the Center Console Cup Holder was controlled within 0.05 millimeters. When installed, it fits perfectly with the reserved position in the original vehicle, and even shakes with your hand without moving at all. It is much better than the common 3-millimeter error of aftermarket parts.

2. Auto Parts Water Cup Holder Drink Cup 15% glass fiber reinforced material, with a load-bearing capacity of 8 kilograms. The raw material contains 15% glass fiber, and the hardness is 40% higher than that of ordinary ABS plastic. The Auto Part Wholesale Black ABS Material Car Cup Holder was tested by pressing an 8-kilogram dumbbell on the cup holder for 24 hours, and there was no deformation. When placed with a 1.5-liter large bottle of cola (about 1.6 kilograms) for three years, it will not crack. This solves the problem of the original factory parts collapsing when heavy objects are placed on them.

3. 2106800114 Car Centre Console Water Cup Drink Holder 3 finely polished, with edge smoothness reaching Ra0.8**. After forming, it went through three processes: rough grinding, fine grinding, and mirror polishing. The edge roughness was controlled at Ra0.8 (equivalent to the smoothness of a mobile phone screen). Wholesale Stock Car Accessories Cup Holder was repeatedly rubbed with sheepskin cup covers for 500 times, and the wear of the cup cover was less than 0.1 gram. It will no longer scratch the expensive insulated cup cover like the old cup holder.

The following are some specific application scenarios of car cup holder:

1. Diameter: 7.5 cm, suitable for 95% common water cups. Inner diameter: 7.5 cm, depth: 9 cm. The 500ml insulated cup, handle-equipped mug, and 600ml sports water bottle can all fit perfectly. "In 2002, my E320 was equipped with a 1.2L large insulated cup, and it didn't wobble even when running for a long distance. The old cup holders always made a clattering sound."

2. -30°C to 80°C without deformation. Both hot and cold drinks can be placed. The temperature tolerance test reaches -30°C to 80°C. In winter, when placing freshly cooked hot porridge (60°C), it doesn't become soft. In summer, when placing iced cola (4°C), it doesn't form frost or deform. "On the hottest days, when placing iced coffee, the outside of the cup holder doesn't sweat at all. The armrest box will no longer be wet."

Installation only requires 2 screws, and it can be completed in 5 minutes. The matching 2 M4×12mm stainless steel screws are aligned with the original vehicle's 4 positioning holes, and then screwed on to be used. It saves 30% installation time compared to original parts. "Do it yourself, including watching the video and installation, it only takes 7 minutes. It costs 150 yuan less in labor costs than going to the repair shop."

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.