Durable Split Center Seat Front Cup Holder for Ford F-150

In summer, put cold drinks in it; in winter, put hot soup in it. There is no need to worry about damage. The heat-resistant ABS material can withstand direct contact with 80℃ hot water, and it will not crack even when exposed to low temperatures due to condensation from cold drinks. "Put chilled beer in it, and the outside of the cup holder will not sweat."

1. Cup Holder FL3Z1813562AT For Ford F150 2015-2016, 1:1 original scan molding, with an adaptation error of less than 0.02mm. It is based on the original water cup holder of the 2016 Ford F-150 and is modeled using 3D laser scanning. The inner diameter, latch position, and installation hole spacing of the cup holder are controlled within 0.02mm. The actual measurement of 200+ 2015-2016 Ford F-150 real vehicles shows that there is no need for grinding or enlarging holes during installation. It can be easily pushed into the original car slot and fits seamlessly with the center console, without any abnormal noise due to bumps.

2. Cup holder (black) made of thickened ABS + TPE dual materials, with a load-bearing capacity of 5kg. The main body of the cup holder is made of 2.5mm thick heat-resistant ABS plastic (0.8mm thicker than ordinary aftermarket parts), and the inner side is coated with 1.2mm thick TPE soft rubber pad. It is suitable for OEM FL3Z1813562AT.

3. Drink Cup Holder with leak-proof groove and drainage hole design, extremely convenient for cleaning. The bottom of the cup holder is reserved with an 8mm wide leak-proof groove, combined with a 5mm diameter hidden drainage hole. Left Right Hand Car Water Cup Holder FL3Z1813562AT for Ford F150 Even if the water cup is overturned, the spilled water will flow into the drainage hole through the leak-proof groove, and will not seep into the interior of the center console. The Car Drink Holder set can be cleaned with a damp cloth and is cleanable, with 90% less dirt accumulation compared to the original factory cup holder without leak-proof design.

The following are some specific application scenarios of car cup holder:

1. When transporting goods over long distances, a 1L insulated cup is stable as a weight. The inner diameter of the cup holder is suitable for containers with diameters ranging from 70 to 95mm (covering 1L insulated cups, 500ml cola bottles, and Starbucks large cups of coffee). The TPE soft rubber pad can firmly fix the water cup. During actual testing at a speed of 120 km/h with an emergency brake, the water cup did not tip over or slide, solving the problem of old cup holders that were "unstable and spilled everywhere".

For outdoor off-road activities, there is no fear of water cups being damaged by bumps and jolts. It is designed for the F-150 off-road scenario. The cup holder snap fastener has a vibration resistance strength of 15N (approximately 1.5kg force). Even on bumpy non-paved roads, the cup holder will not loosen, and the inner TPE soft rubber can buffer the impact, preventing the stainless steel water cup from being scratched with dents.

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.