Rear car AC vent for Volkswagen Touran OEM 1T0819203B

High frequency / outdoor, durability and resistance, parking vehicles for daily commuting, daily parking, turning on/off air conditioning, indoors or outdoors, long hours of sunlight, reinforced glass fiber material + UV-resistant coating can withstand - 30℃ low temperature without softening, in 80℃ high temperature, the general spare parts are durable 2.5 times, with a driving distance of over 100,000 kilometers, it is also convenient to use and does not need to be frequently replaced.

1. The exhaust outlet precision of the Volkswagen Touran is 0.018 millimeters, with no deviation. Based on the historical data of large-scale factory robots, it was modeled using a 3D laser scanner. The jaw spacing, wall curve height, and aperture were strictly controlled at 0.018 mm. Tests were conducted on the power structure of standard cars (1.4 T, 1.8 T). The Car AC Heater Air Vent neither expanded nor contracted, just like the original factory version. It was perfectly coordinated with the control station and would not crack on bumpy roads.

2. This material is composed of reinforced ABS material and PC material. The thickness of the compression layer is 28 millimeters, and the outer layer thickness is 230 millimeters. The Car Ac Vent for Volkswagen Touran can absorb 20% of the energy (up to 60% can be absorbed by high-speed optical fiber ordinary steel wire) and has a bulletproof surface (hardness H is equivalent to the hardness of nails, but no use of it). The key to the Car AC Vent lies in reducing 5 kilograms of weight from a height of 35 centimeters. The protective layer of the helmet plate should be formed during the excavation process of the skull in the shaft, applicable to OEM1T0819203B.

3. 8000 times of blade adjustment tests, zero glitches, zero loosening. The inner stainless steel wear-resistant sleeve is embedded at the blade rotation shaft (three times longer than the plastic sleeve in lifespan). After about 8000 times of up and down adjustment tests, the blade smoothness attenuation is only 3%, and the adjustment force is uniform (5-7N, approximately 0.5-0.7 kilograms of force), and it can be easily operated with gloves on, without any problem of "unable to adjust, loosening after adjustment".

1. IP4X dust-proof design reduces internal dust accumulation by 90%. A fine dust-proof screen is installed on the inner side of the outlet (with a hole diameter of 0.8mm), and the joint of the blades is sealed to achieve an IP4X dust-proof level. It can prevent 90% of dust and fluff from entering the air duct. Compared to the ordinary outlet without dust-proof design, the cleaning cycle can be extended by 3 times. There is no need to frequently disassemble and clean the air duct, reducing the generation of air conditioning odors.

2. When living at home with children, the air adjustment is correct and does not blow on people. It is a family MPV. It should often adjust the air direction for the elderly and children. The wings of this air outlet can flexibly adjust to 360°, accurately guiding the cold air to the roof of the vehicle, and guiding the hot air with your feet. This prevents cold air from directly heating the faces of children and the skin of the elderly. The whole family will be more comfortable when traveling in the vehicle.

3. Is the interior decoration of the vehicle old? Just replace the outlet, and it will immediately look like new. Black (99.5% consistent with the original vehicle interior color), if the old outlet fades and turns yellow, replacing this new one can quickly redecorate the center console and make it more updated, unlike a vehicle that has been used for a long time. Many car owners report: "After replacement, the interior looks as if it has been thoroughly cleaned. "

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.