8R0945097 LED Right Outer Tail Light Brake Lamp

Non-disassembly installation without damage. 1:1 replica of the original factory mold. Supports direct replacement of the original vehicle high-position lamp assembly (no need to remove the rear windshield). Installation only requires 5 steps (open cover - remove wires - replace part - plug in wires - fasten cover). Ordinary users can complete it in 10 minutes. Compared to traditional modifications, it saves 80% of labor time. Super convenient and easy. Generally, it is recommended to have it installed by professionals to avoid incorrect part installation and brake light not showing.

1. Audi Q5 09-18 adopts the ultra-long-life LED matrix technology with custom-grade LED beads from Osram, Germany. One Car 3RD Third Brake Light can be used for a long time and supports over 100,000 switch cycles.

2. The Rear Trunk Tail Stop Lamp is equipped with 12 high-density LED chips, providing a luminous flux of 600LM with the red light wavelength precisely controlled at 625nm ± 5nm. Tests show that in extreme weather conditions such as heavy rain and thick fog, the recognition distance for vehicles behind can reach 250 meters, which is 60% higher than that of ordinary high-mounted stop lamps. FIT OEM 8R0945097.

3. The Cab Roof Center Brake Stop Light is equipped with an intelligent circuit to prevent false triggering, featuring an MCU microcontroller that can monitor current fluctuations in real time (with an accuracy of ±0.01A) to avoid false lighting caused by electromagnetic interference. When used as an Auto Parts Stop Lamp Braking Signal Light, it can quickly detect and fully light up within 0.1 seconds, meeting Audi's original factory response time standard of 0.1-0.3 seconds.

4. The advanced lamp body is made of aviation-grade 6063 aluminum alloy bracket and PC weather-resistant engineering plastic, and has passed the IP69K high-pressure water wash certification (able to withstand 100Bar water pressure). It has a wide operating temperature range from -50°C to 105°C, suitable for extreme environments such as deserts and polar regions. After five years of aging tests, the light transmittance still remains at 92%.

Here are three specific application scenarios of car tailgate switch:

1. The fault self-diagnosis system integrates a CAN-BUS bus communication module, enabling real-time interaction with the Audi vehicle computer. When a short circuit, open circuit, or light attenuation exceeds 30% occurs, the dashboard immediately displays the "High Brake Light Fault" icon and stores the fault code (such as P0500), facilitating precise repairs and ensuring no errors.

2. Invisible aesthetic design, with an ultra-thin lamp body thickness of only 8mm, seamlessly blending with the Q5 shark fin antenna. When off, it presents a matte black texture, and when lit, it forms a 120° wide-angle light band. At night, it creates a "triple three-dimensional warning" effect with the LED taillights, enhancing the overall technological sophistication of the vehicle. Our products are only available in red, and currently, there is no production of black.

3. Lightweight and environmentally friendly manufacturing process, with a total assembly weight of only 320 grams, reducing by 65% compared to the original cast iron version. It adopts water-based electrophoretic coating technology, with VOC emissions lower than the EU REACH standard limit by 90%, and the production process achieves zero wastewater discharge.

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.