Best-selling new air conditioning outlet Volkswagen Amarok 2010-2015.

For vehicles used in dusty environments, less frequent disassembly and cleaning is more convenient. Pickup trucks often travel in dusty areas such as construction sites and deserts. Ordinary air outlets are prone to accumulate dust and block the air ducts. This air outlet with a dust-proof screen can extend the cleaning cycle of the air duct by three times, eliminating the need for frequent disassembly and cleaning of the interior. Compared to the old model without dust-proof design, the occurrence rate of air conditioning odor is reduced by 90%.

1. The original 0.02 mm precision mold for Volkswagen Amarok from 2010 to 2015, with 100% compatibility for both versions. The factory original exhaust for the single/double-row cabin of Amarok in 2013 was used as the basis for the dual models. It was modeled using 3D laser scanning, with the spacing of the knobs, the curvature of the panel, and the position of the installation holes having an error of ≤ 0.02 mm. The actual measurement showed that the Car AC Heater Air Vent was compatible with all Amarok models from 2010 to 2015 (including the 2.0T diesel and gasoline versions), without the need for grinding or enlargement. Just align the 4 slots of the original vehicle and push it in, and it can perfectly fit the center console, with a gap of less than 0.1 mm. There is no "collision" sound on uneven off-road roads.

2. PA66 + glass fiber reinforced material, with an impact resistance of up to 82 MPa. 2H0819703G041 Car Front Dashboard Air Conditioning is mainly made of PA66 glass fiber composite plastic, with a thickness of 2.8 mm (60% stronger than ordinary ABS material), and has an 80-micron thick UV-resistant coating on the surface. The test result for the Volkswagen Amarok Car Ac Vent: a 5-kilogram weight dropped from a 40-centimeter height without any cracks, and after 1000 hours of 150°C high-temperature aging, the strength still remained at 85%, solving the common problem of "fragile cracking and easy breakage" of the old air outlets.

3. 10,000 times adjustment test, with zero wear and no jamming of the rotating shaft, the blade rotating shaft uses POM wear-resistant material (impact strength 39 J/m), with a stainless steel shaft sleeve embedded inside, after about 10,000 times of up and down adjustment tests (equivalent to 10 years of daily use), the smoothness attenuation is only 3%, the adjustment force is stable at 6-8 N (about 0.6-0.8 kilograms of force), even with gloves on, it can be easily operated, and there will be no problem of "unable to adjust, loose and shaking".

1. The old air outlet is cracked / stuck? Save $1000 on repair costs with a 70-dollar solution. "My 2012 model Amarok air outlet was cracked by a tool. The 4S store quoted 1300 dollars for replacing the central control assembly. This was only 13 dollars, and I finished installing it in 10 minutes. The off-road performance was smooth even after half a year of adjustment." - Australian car owner Jake. The cost was only 1/18 of that of the 4S store. There's no need to spend a lot of money on small parts.

2. When off-roading / hauling goods, the vehicle experiences bumps. It's not afraid of being damaged or stuck. Designed for Amarok's frequent off-road and hauling scenarios, the PA66 fiberglass material has three times the impact resistance of ordinary aftermarket parts. Even when bumped on unpaved roads, it won't break; the wear-resistant rotating shaft can still precisely control the airflow during vibration, preventing cold air from directly blowing on the driver and affecting the control.

3. Exposed to intense sunlight / extreme cold, the material remains stable and does not deteriorate. After being frozen at -40℃ for 48 hours and exposed to 80℃ heat for 72 hours, the panel shows no brittleness or softening. Whether it's being exposed to the sun during desert driving or used in the northern winter, the air outlet can still be adjusted normally and will not crack or fail due to sudden temperature changes.

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.