4L5Z1013562AAB Replacement Front Split Bench Center Cup Holder for Ford

An effortless 8-minute installation, without the need for professional tools. The original factory snap-lock structure is retained. Use a plastic pry bar to gently lift the three snap locks at three points to remove the old cup holder. Align the new cup holder with the positioning points and press it in place. A "click" sound indicates that the installation is complete. 97% of car owners report that the installation takes less than 8 minutes. No need to disassemble the center console or connect wires. Even beginners can operate independently.

1. The Ford Ranger 2005-2011 model has an original factory molding with an accuracy of 0.02mm. It seamlessly fits all vehicle models. The original factory water cup holder of the 2008 model was used as the base, and 3D laser scanning was employed for modeling. The spacing of the cup holder (black) latch, installation holes, and the curvature of the slot have an error of ≤ 0.02mm. The actual fit was tested for all vehicle models from 2005 to 2011 (including 2.3L gasoline version, 3.0L/4.0L diesel version, and both front-wheel drive and four-wheel drive, manual and automatic transmission versions). No hole modification or grinding was required. The drink cup holder snaps into the original vehicle slot and is securely fastened upon pressing, with a gap of less than 0.1mm between the car console and the holder. There are no loosening or abnormal sounds during bumpy driving.

2. The product is equipped with ABS and fiberglass reinforced material. It can bear a load of 8kg without cracking. The main body of the cup holder uses ABS with 18% fiberglass composite plastic (45% stronger than ordinary ABS), and 2mm thick silicone anti-slip pads are embedded in the slot (Shore hardness 38°). After testing, it can withstand a vertical load of 8kg (equivalent to the weight of 16 500ml mineral water bottles). The Car Water Cup Holder for Ford Ranger 2005-2011 does not deform or break; the friction coefficient of the silicone pad reaches 0.85, which can firmly fix the cup, solving the common problem of "poor load-bearing capacity and cup sliding" in the old cup holders.

3. The Car Drink Holder has undergone 10,000 times of opening and closing adjustment tests. Its service life exceeds 9 years. The adjustable slot body uses POM wear-resistant rotating shaft. After 10,000 times of opening and closing and size adjustment tests (equivalent to 9 years of daily use), the wear amount is ≤ 0.03mm, and the adjustment smoothness attenuation is only 5%. The new cup holder slot body can be adjusted continuously within a range of 6cm-10cm, suitable for common cup types such as mineral water bottles, thermos cups, and coffee cups. It does not loosen after locking.

The following are some specific application scenarios of car cup holder:

1. The off-road and cargo transportation are bumpy. Cupper is stable as a mountain. As a tough pickup truck, Ranger is often used in bumpy scenarios such as off-road and transporting goods at construction sites. This cup holder can hold up to 8kg and has a high-friction silicone pad. Even when driving on unpaved roads, Cupper will not tip over or leak. Compared to ordinary aftermarket cup holders, its stability on bumpy roads is improved by 70%, preventing hot water from spilling and causing burns.

2. Multiple cup shapes are compatible, meeting the needs of the entire family. The cavity can be adjusted from 6 to 10 cm, and it can precisely fit common cup shapes such as 500ml mineral water bottles, 350ml thermos cups, and 473ml cola cans. When traveling with children, you can place both baby bottles and adult water cups at the same time. During long-distance driving, you can fix coffee cups to prevent them from tipping over. It is suitable for multiple usage needs for one person and one vehicle.

3. High-temperature exposure + frequent use, durable without hassle. After being tested at -30℃ low temperature freezing and 85℃ high-temperature exposure, the ABS glass fiber material does not become brittle or soften. It is suitable for extreme climates in the north and south. The adjustable lifespan is 10,000 times, which is 2.5 times that of ordinary aftermarket parts. Frequent taking and placing of cup holders when getting on and off the vehicle does not easily damage it. For old cars with a mileage of over 180,000 miles, it is a cost-effective interior repair option.

Q: What auto parts do you supply?

A: Our company mainly provides AC Grill vent, Inner pull handle, Cup holder, Coin Storage, Tailgate switch, Car sun visor, Center Console Ashtray and OBD Plug Cover.

Q: What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery.

Q: How about your delivery time?

A: Generally, it will take 3 to 10 work days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q: Can you produce according to the samples?

A: Yes, we have many/ears of development experience and mature technical team including production molds and production technology.

Q: Do you test all your goods before delivery?

A:Yes, we have 100% test before delivery.